curved roof panel roll forming machinery

1.Power of main motor : 1.5KW 2.Voltage : 380V/50Hz/3phase 3.Line speed : about 9 m/min 4.Color : blue

                                                                    TECHNICAL  SCHEME

1.Name of goods:

HT  curved roof panel roll forming machinery

2.Parameters of curved roof roll forming machinery  :

(1) Thickness of middle plate : 25mm

(2) Shaft : 5

(3) Diameter of shaft (solid shaft): 74mm

(4) Material of shaft (solid shaft): (high grade) 45# Steel, quenched and tempered treatment,hard chromize coated 0.05-0.07mm

(5) Drive type of roll forming machine : drive by chain

(6) Chain : 19.05 mm (high grade)

(7) Bearing : 6210 (high grade)

(8) Reducer : 3# cycloid reducer (high grade)

(9) Power of main motor : 1.5KW

(10) Voltage : 380V/50Hz/3phase

(11) Line speed : about 9 m/min

(12) Arching radius : ≥2500mm

(13) Feeding width : 840mm or 860mm or 900mm or 850mm

(14) Suitable coil thickness : accepted thickness for steel coil is 0.35mm-0.8mm.

(15) Appearance size of main forming machine : 1.3m (length)*0.8m (width) *1.4m (height)

(16) Weight of main forming machine : about 1.0T

3.Profile

4.Photo of curved roof roll forming machinery  

 Certification of ISO 9001: 2000  for curved panel roll forming machinery

Our factory

curved roof panel roll forming machinery